Ghi chú về các bộ phận nâng trực tiếp thang máy:
Để không ảnh hưởng đến nguồn cung cấp thông thường, đôi khi cần phải thực hiện kiểm tra trực tiếp điện áp thấp - đối với các bộ phận nâng hạ áp cho tủ phân phối điện áp - thấp và các thiết bị điện áp - thấp khác . Các bộ phận nâng hạ cần bảo trì trực tiếp điện áp thấp - nên chú ý đến các vấn đề sau.
1. There should be a personal guardianship. The purpose is that if an accident occurs during the overhaul, the guardian can immediately cut off the power (disconnect the circuit breaker or knife gate in the distribution cabinet, or unplug the fuse); in addition, when the overhauler may touch or overshoot When approaching the conductor or misoperation, the guardian can remind in time to prevent electric shock and other accidents.
2. Use tools with insulated handles, stand on dry insulation (such as wooden ladders, wooden tables, stools, etc.) when working, wear gloves (such as dry cloth gloves), and wear insulated shoes (such as rubber shoes, Plastic sole shoes). If you are working on the road, you should also wear a hard hat. Must wear long sleeves to work. It is strictly forbidden to use tools such as files, steel tapes, brushes with metal objects, threading screwdrivers and ordinary wire cutters.
3. Khi đại tu trên đường dây điện áp thấp - được dựng lên bởi điện áp cao và thấp trên cùng một cực hoặc trên nền tảng máy biến áp, hãy kiểm tra khoảng cách từ thân điện áp cao - bằng dây và lấy các biện pháp để ngăn chặn sự tiếp xúc tình cờ với cơ thể tích điện áp cao -. Khi các biện pháp cách điện không được thực hiện đối với các dây dẫn điện áp thấp -, nhân viên bảo trì sẽ không đi qua. Khi tác động lên các thiết bị phân phối như tủ phân phối điện áp - thấp, phải thực hiện các biện pháp cách ly để ngăn chặn các pha - thành - và nối đất pha -.
4. Before climbing the pole, transformer stand or equipment, the phase line, neutral line and ground line should be distinguished, and the working position should be selected. When disconnecting the conductor, the phase wire should be disconnected first, and then the neutral or ground wire should be disconnected; when overlapping the conductor, the sequence is reversed. During the operation, the human body must not touch two threads at the same time.
5. Các cuộn dây thứ cấp của máy biến điện áp và máy biến dòng nên được nối đất một cách đáng tin cậy khi đại tu đồng hồ đo giờ - và mạch rơle trong tủ phân phối điện. Khi ngắt kết nối vòng lặp hiện tại, ngắn - mạch đầu cuối chuyên dụng ở phía thứ cấp của máy biến dòng.
6. Standing ladders and stools should be firmly installed, and someone underneath must be supported to prevent the maintenance personnel from sliding down.
7. When repairing the wiring pile heads where the phase line and the neutral line (two phase lines of different phases) are very close, such as the power switch, the terminal of the power distribution cabinet, the relay, the transfer switch, etc., should be carried out very carefully Power outages should be carried out for maintenance), eyes must not be close, otherwise it is easy to cause a short circuit accident and burn your eyes.
8. The live lift boom parts should pay attention to moisture and waterproof on the ground; outdoor live lift boom parts should be avoided on rainy days. On thunderstorm days, live lift boom parts should be stopped.
Sau khi các bộ phận nâng trực tiếp thang máy được hoàn thành, chúng cần được kiểm tra cẩn thận. Nội dung kiểm tra giống như kiểm tra sự cố mất điện.






